Installation Tips
  X Series
  L & T Series
  CB Series

Installing your CB Cellular Phone Booster

Installing your CB cell phone signal booster is simple, just follow the following advice to get the most out of your new Signal Aid product.

First off, you will want to install the external mount antenna (the one that receives the signal from the network) in the area around you that gets the best reception. In your car or boat, this will probably be on the rooftop, but against a window is often fine. Remember, the higher and more open the area, the better the signal is going to be. Ideally the antenna should face the Base Station of the operator that the signal is intended to amplify. If you don’t know which way that is, click here for help locating your nearest Base Station. Ensure that your external mount antenna is properly affixed to the outside of your car if you are going to be driving while using the CB booster.



1. Mount the external antenna in the optimal area, as described above. Connect the cable from the antenna to the booster.
2. Place the booster in a convenient location in your vehicle, home or office. The booster should be within a few feet of where you will be making your phone calls from, as it will connect directly to your phone via cabling and an adapter. Connect the universal adapter to your mobile device and to the cable. Connect the cable to the booster.
3. Connect the power supply to the booster and turn it on. That’s it! You’re ready to make a phone call where you couldn’t before.

Not what you were looking for? Do you need more detailed installation information? Click here to get in touch with one of our customer service experts.